Previous Topic

Next Topic

Book Contents

Book Index

Back Numbers

To print Back Number Labels select Back Numbers from the Tools Menu. The following dialog will be displayed...

Back Numbers Dialog

This dialog allows you to select any combination of back number labels to be printed by clicking and dragging or CTRL/clicking.

When you click OK the Label Options dialog is displayed...

Label Options Dialog

All you need to do here is select Dot matrix or Laser and ink jet (ShowPro remembers your last selection) and click OK.

The Print height scale modifier is normally set to 1.0. Some ink jet printers need this value to be set to 1.035. Other ink jet printers may work better with a different value. If your labels are not printing properly, you can adjust this value to correct the problem.

ShowPro supports Avery 4013 tractor feed labels and Avery 5161 Laser labels. When you select Dot matrix or Laser and ink jet you are essentially selecting one or the other of these labels types. You can configure other labels by clicking New Label...

New Label Dialog

 

 

 

 

 

 

 

 

If you have Microsoft Word it has the parameters for all the available labels. You can look your label up there and then enter the parameters here.

If you selected Laser and ink jet you will have an opportunity to control which label on the sheet printing will start at. This avoids wasting any labels.

Label Start Col Row

If you selected Dot matrix labels you will see this...

Printer Online Dialog

When you click OK your labels will begin printing.

See Also

Setting Up Your Show

Setting The Basic Information

Show Parameters

Sub Shows

Creating The Class List

Setting Up Fees

Setting Up Judges

Setting Up Prize Money

Stall Types

Breeds

Creating Entries

Enterable Sections

The Show Schedule

Championship Points

Reserved Stalls

Points Tables

High Points

Score Sets

Setting up Grand and Reserves

Judges Cards

Scoreboard Formats